Choose whatever method works best for you:

• Send an email to rfq@genconcab.com
• Call us at 800-657-6650. For reference, you may want to download the configuration worksheet.
• Use the following short, 2-part form to submit your quote request (you’ll have an opportunity to upload files on page 2).
  1 Configuration and Options

  2 File Upload and Contact Info

  • Configuration and Options

    STANDARD or most common configuration is selected by default - feel free to change to suit your application.

  • Mounting Style*
    • (W) Wall Mount
    • (P) Pad Mount (freestanding)
    Default: (W) Wall Mount. Lower cost and usually easier installation (where applicable) than pad mount.
  • Rated Continuous Current*
    • (04) 400 Amperes
    • (08) 800 Amperes
    • (12) 1200 Amperes
    • (16) 1600 Amperes
    • (20) 2000 Amperes
    • (24) 2400 Amperes
    • (28) 2800 Amperes
    • (32) 3200 Amperes
    • (40) 4000 Amperes (not UL listed)
  • System Voltage*
    • (1) 120/240V 1ph. 3W
    • (2) 120/240V 3ph. 4W
    • (3) 208/120V 3ph. 4W
    • (4) 480V 3ph. 3W
    • (5) 480/277V 3ph. 4W
    • (6) 600/347V 3ph. 4W
    Note: Pricing is the same regardless of voltage.
  • Permanent Bus Connections*
    • (S) Mechanical set screw lugs
    • (C) Long barrel compression lugs (available for copper cables only)
    • (P) NEMA two hole punching only (compression lugs supplied by others)
    Default: (S) Mechanical set screw lugs.
  • Generator Connections*
    • (M) Male E1016 series Cam-Loks
    • (F) Female E1016 series Cam-Loks (Not UL listed)
    • (S) Mechanical set screw lugs
    Default: (M) Male E1016 series Cam-Loks. This is by far the most common configuration.
  • Options
    • (1) Access panel interlocking micro switch
    • (2) Key interlock provision (for user-provided Kirk Key interlock)
    • (3) Phase sequence indication
    • (4) Security cabinet (internal Cam-Lok compartment)
    • (5) Convenience outlet provision
    • (6) Snap covers for Cam-Loks
    • (8) Welded construction
    • (9) Powder coat finish
    • (10) Stainless steel cabinet (instead of aluminum)
    • (13) 4-point 20A terminal strip
    Common: (9) Powder coat finish. Remove for bare unpainted (shiny) aluminum cabinet.

  • Upload files - plans, specifications, etc.:
    Drop files here or

    Accepted file types: pdf, jpg.
  • Name*
    First Last
  • Company Name*
  • Please select one company type:
    Electrical ContractorElectrical WholesalerGenerator Dealer/DistributorConsulting EngineerOther
  • Phone*
  • Email*
  • Please include any additional comments or questions:
  • Please check the box below:

Submission may take a few moments. You will receive a confirmation message when complete.